Utility Substation Battery Monitors

Images

Features

Mounting Options include either Panel mount or 19" Rack Mount (3U or 4U) , Single or Dual Units

Audible Alarms for +/- Ground Faults, Hi Bat VDC, Low Bat VDC, Open Battery (Ripple voltage), and Loss of AC to Charger

Alarm Delay 1-60 Seconds

Alarm Reset can be Manual or Remote Contact Closure

Mode Selection from Display for Scanning

I420mA Analog Output is standard with 0-1mA Output or Serial Communication RS485 DNP3.0/Modbus Options

Ground Fault Locator and Corrosion Detection Options

ANSI C37.90 - 1974 (Surge Withstand) Compliant

IEC 61000-4-3 (EMC)

SPECS

Contact Ratings: 28VDC, 25mA @125VDC

Voltage Indication: 0 to 199.9

Voltage Accuracy: +/- 0.2VDC

Display Ranges: Battery VDC +/- Bus to Ground, Ground Fault Voltage

Operating Temperature Range: -4 degrees F to 131 degrees F (-20 degrees C to 55 degrees C)

Battery Input: 50 to 180 VDC, 3VA, 125V Battery

Ground Resistors (+/- Bus to Ext Ground) @ 30.82 kOhms

Input Voltages available: 24VDC, 48VDC, 125VDC, 250VDC

Approvals

ANSI(IEEE) C37.90 (Surge Withstand)

IEC 61000-4-3 (EMC)

Resources

25-1000 Battery Monitor User Manual 🔒

Arga - Older Model Battery Monitor Set Up (zip) 🔒

Battery Monitor Other Features Video #4

Battery Monitor Ground Fault option Video #3

Battery Monitor Display Functions Video #2

Battery Monitor Overview Video #1

15-1000-250A-X 🔒

15-1000-125A-X 🔒

1A - Arga Panel Mount Series 1000 Battery Monitor

Model Variations

25-1000-125A Battery Monitor, I420/DNP/Modbus/125vdc

25-1000-125B Battery Monitor, I01/DNP/Modbus/125vdc

25-1000-24A Battery Monitor, I420/DNP/Modbus/24vdc

25-1000-24B Battery Monitor, I01/DNP/Modbus/24vdc

25-1000-48A Battery Monitor, I420/DNP/Modbus/48vdc

25-1000-48B Battery Monitor, I01/DNP/Modbus/48vdc

25-1000-250A Battery Monitor, I420/DNP/Modbus/250vdc

25-1000-250B Battery Monitor, I01/DNP/Modbus/250vdc

25-1000-125A-PB Battery Monitor, Pigtail/I420/DNP/Modbus/125vdc

25-1000-125B-PB Battery Monitor, Pigtail/I01/DNP/Modbus/125vdc

25-1000-48A-PB Battery Monitor, Pigtail/I420/DNP/Modbus/48vdc

25-1000-48B-PB Battery Monitor, Pigtail/I01/DNP/Modbus/48vdc

15-1000-125A-1 19" 4U Rack-Mounted One Meter/I420/DNP/Modbus/125vdc

15-1000-125B-1 19" 4U Rack-Mounted One Meter/I01/DNP/Modbus/125vdc

15-1000-48A-1 19" 4U Rack-Mounted One Meter/I420/DNP/Modbus/48vdc

15-1000-48B-1 19" 4U Rack-Mounted One Meter/I01/DNP/Modbus/48vdc

15-1000-125A-2 19" 4U Rack-Mounted Two Meters/I420/DNP/Modbus/125vdc

15-1000-125B-2 19" 4U Rack-Mounted Two Meters/I01/DNP/Modbus/125vdc

15-1000-48A-2 19" 4U Rack-Mounted Two Meters/I420/DNP/Modbus/48vdc

15-1000-48B-2 19" 4U Rack-Mounted Two Meters/I01/DNP/Modbus/48vdc

Accessories

25-1100-GF Ground Fault Hand Held Detector

25-1100-H1 High Impedance CT

25-1100-H2 High Impedance CT and Ripple Generator

Older Models

25-498 Battery Voltage/Ground Meter/Alarm Relay/125vdc

Battery Input 50 to 180vdc, 3VA

Voltage Indication 0 to +/-199vdc

Ground Resistor 30kOhms

Power Lost Charger Input Voltage 110 to 240vac, Alarm Input Voltage < 70vac

Alarm Voltage Setting Hi = 125-150V / Low = 100 -125V

Ground Fault Voltage Setting Range +/-13 to +/-100V

Open Cell Detection AC Ripple Setting .2 to 2.0V

Options 25-498-IO1 = 1mA DC output

25-498-I420 = 4 outputs 20mADC

25-498-J3.0 = RS485 with DNP3 or MODBUS protocols

25-469 Battery Voltage/Ground Meter/Alarm Relay/125vdc

Battery Input 90 to 180vdc, 3VA

Voltage Indication 0 to +/-199vdc

Ground Resistor 30kOhms

Power Lost Charger N/A

Alarm Voltage Setting Hi = 125 to 150V / Low = 100 to130V

Ground Fault Voltage Setting Range +/-13 to +/-100V

Open Cell Detection N/A

Options 25-469-IO1 = 1mA DC output

25-469-I420 = 4 outputs 20mADC

25-469-J3.0 = RS485 with DNP3 or MODBUS protocols

Drawings

Series Drawings

25-1000-125A 🔒

Standard Part # Drawings

Contact Factory

Utility Substation Battery Monitors - Series 1000