DETENT-ACTION ROTARY SWITCHES SPECIAL CONFIGURATIONS Series 41 =  S21 44 =  S24   45 =  S25 48 =  S28   ORDERING INFORMATION - Shorting Blank = No S = Yes Series 61 =  S21 (45°) 62 =  S25 (30°) 63 =  S28 (22.5°) Handles B =  Oval ORDERING INFORMATION - Shorting Blank = No S = Yes Number of Decks Series 28, 01-15 Series 21 & 25, 01-25 Assemblage 2 = 2 3 = 3 See Page 17 Series 65 =  S31 Handles A =  Removable at 0° B =  Removable in all Positions ORDERING INFORMATION - Shorting Blank = No S = Yes Number of Decks 01-06 Assemblage 2 = 2 3 = 3 See Page 17 Series 81 =  S21 82 =  S25 83 =  S28 Handles A =  Flush B =  Oval ORDERING INFORMATION - Shorting Blank = No S = Yes Assemblage 2 = 2 3 = 3 See Page 17 Number of Decks Series 28, 01-15 Series 21 & 25,    01-25 Series 51 =  S21 (45°) 52 =  S25 (30°) 53 =  S28 (22.5°) Handles B =  Oval ORDERING INFORMATION - Shorting Blank = No S = Yes Assemblage 2 = 2 3 = 3 See Page 17 Number of Decks Series 28, 01-15 Series 21 & 25, 01-25 Series 71 =  S21 72 =  S25   73 =  S28 74 =  S24   75 =  S31 Handles A =  Flush (Series 21, 25, 28, and 31 Single Hole) B =  Oval (Series 24 and 31 Four Hole) ORDERING INFORMATION - Shorting Blank = No S = Yes Assemblage 2 = 2 3 = 3 5 = 5 (For Series 25 only) See Page 17 Number of Decks 01 = 1 02 = 2 03 = 3 Assemblage 2 = 2 3 = 3 See Page 17 Number of Decks 01-10 (All Series) 15 (Series 21, 25, and 28) 20 and 25 (Series 21 and 25)   Handles A =  Flush B =  Oval Key Lock Handle • Locks in Vertical Position • Key Removable when Locked • All Units have Same Key Code • 4" Square Black Nameplate Key Operated Handle • Key Removable in 0° or all Positions • All Units have the Same Key Code • All Series 31 Key Operated Switches are Single Hole Mount Solenoid Lock Handle • Switch Can Be Turned Only when Solenoid is Energized (110-125VAC Input) • Consult Factory for Switches that can be Turned when Solenoid is De-energized Push-to-Turn Switches • Must Push approx. .25" (15 lb.) to Turn • Push opens a NC Contact Allowing Switching at no Load or between Positions Without Activating Intermediate Positions Spring Return Switches (Momentary Action) Waterproof Mount Switches Note: For Series 31, use standard Tap and Selector Switches, plus seal-nut #02017-8 Note: For Series 24 Consult Factory